Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Wilton Manors, FL
Window installation in Wilton Manors typically runs $650-$1,400 per opening for impact-rated units, with most homes needing full-frame replacement due to 60-year-old jalousie windows and corroded aluminum frames. Every job we measure here starts with a written price that matches the final invoice - Haven Clause 1 - because canal-adjacent humidity and HVHZ code requirements make surprises common unless the survey is thorough. Call (754) 714-7309 to schedule your free measured survey.
Why Wilton Manors Homes Are Different
Wilton Manors sits entirely within Florida’s High Velocity Hurricane Zone, which means Miami-Dade-approved impact windows and doors are required for any permitted replacement - a stricter standard than most of the state faces. The city built out almost entirely in the 1950s and ’60s, leaving a housing stock of single-story concrete block ranch homes originally fitted with jalousie windows and steel-framed sliding glass doors that were grandfathered for decades but now fail on every measurable performance metric.
The Middle River canal system threads through residential blocks here, exposing homes to salt-laden, high-humidity canal air year-round rather than seasonal coastal breezes alone. We regularly find that jalousie-window aluminum frames have corroded so severely at the frame-to-block interface that the rough opening is larger and more irregular than any original spec suggests, requiring custom-sized impact units or masonry infill before installation. This is not an exception in Wilton Manors; it is the norm.
Our Main Wilton Manors Services
Most calls from Wilton Manors homeowners fall into two categories: replacing original jalousie and corroded slider systems with HVHZ-compliant impact units, and upgrading to energy-efficient glazing that handles the canal-adjacent thermal load. Here is how we approach the work.
Window Replacement in Wilton Manors
We replace original jalousie windows, corroded aluminum frames, and failed single-pane units with impact-rated or energy-efficient systems sized to the actual rough opening - not the nominal dimension on the original 1962 permit. Our measured survey documents frame condition, block integrity, and any masonry infill needed before the written quote is finalized. Window Replacement in Wilton Manors covers the full scope of what we measure and how we price it.
Impact Windows & Doors in Wilton Manors
Every permitted window or door replacement in Wilton Manors must carry Miami-Dade NOA certification due to full HVHZ status. We specify PGT, CGI, CWS, or ES Windows impact lines by performance tier and price range, not by margin, and we pull permits as standard practice. Our crews are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3. Impact Windows & Doors in Wilton Manors details the product lines and code documentation we provide.
Sliding & Patio Doors in Wilton Manors
Original steel or aluminum sliding glass doors in Wilton Manors’ 1950s-’60s CBS homes have typically corroded into the block rough opening after 60+ years of humidity exposure. We remove the failed frame, assess block damage, and install impact-rated replacement sliders or French door systems with proper sill pan flashing and HVHZ certification. Sliding & Patio Doors in Wilton Manors explains our measured survey process for these openings.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Wilton Manors
Window installation in Wilton Manors almost always means removing original jalousie windows or corroded aluminum frames from 1950s-’60s CBS ranch homes and installing Miami-Dade-approved impact-rated or energy-efficient units. The canal-adjacent humidity here accelerates frame oxidation and seal failure, so we treat every opening as a custom measurement job rather than a standard swap - the written quote reflects actual rough-opening dimensions after frame removal, not the original 1962 spec. Our Window Installation hub explains the full measured survey process.
Single & Double Hung Windows
Signs you need it
Your jalousie windows leak during storms, the aluminum frames show white oxidation at the block interface, or the original single-pane glass transmits enough heat to raise your cooling load measurably.
What it costs in Wilton Manors
Single and double hung impact window installation in Wilton Manors typically ranges from $650 to $1,100 per opening, with masonry infill or frame reconstruction adding $150-$400 where corrosion has enlarged the rough opening.
How we do it
We remove the existing frame to bare block, document the actual rough opening with photos you keep, install the new hung window with proper sill pan and shimming, and seal with polyurethane foam and backer rod before final inspection.
Horizontal Roller Windows
Signs you need it
Your original horizontal slider has corroded tracks that bind, the lock no longer engages due to frame distortion, or you need HVHZ-compliant impact glass for a permitted replacement.
What it costs in Wilton Manors
Horizontal roller impact window installation in Wilton Manors typically runs $700 to $1,200 per opening, with premium laminated glass packages or custom widths for enlarged rough openings at the upper end.
How we do it
We extract the old roller frame, assess track corrosion depth into the block, install the new impact-rated roller with stainless steel hardware and weep holes cleared to canal-grade drainage standards, then document with photos.
What Window Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung impact window | $650 - $1,100 per opening |
| Horizontal Roller impact window | $700 - $1,200 per opening |
| Masonry infill / frame reconstruction | $150 - $400 per opening |
Do you pull permits for window replacement in Wilton Manors?
Yes - every permitted window replacement in Wilton Manors requires Miami-Dade NOA-certified impact products and a building permit, which we pull and manage through final inspection as standard practice. Call (754) 714-7309 to schedule your free measured survey and written quote.
How long does window installation take in Wilton Manors?
Most single-opening replacements finish in one day; full-home jobs with masonry infill typically run 2-4 days depending on rough-opening condition and inspection scheduling. Call (754) 714-7309 for a timeline based on your specific openings.
Door Installation in Wilton Manors
Door installation in Wilton Manors means replacing corroded steel or aluminum frames from the 1950s-’60s with Miami-Dade-approved impact-rated systems that pass HVHZ inspection. The original sliders and entry doors in these CBS ranch homes have typically fused to the block after six decades of canal-adjacent humidity, making measured survey and potential masonry repair standard parts of our scope. Our Door Installation process starts with the documented frame reading you keep.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your steel entry door shows rust at the threshold, the frame no longer seals against weatherstripping, or your current door lacks Miami-Dade NOA certification for HVHZ compliance.
What it costs in Wilton Manors
Hurricane-proof front door installation in Wilton Manors typically ranges from $1,800 to $3,500 including frame, hardware, and permit, with Therma-Tru or ViewLux impact-rated fiberglass systems at the mid-to-upper range.
How we do it
We remove the old door and frame to assess block condition, install the new impact-rated pre-hung unit with proper shimming and anchoring to CBS construction, apply sealant and sill pan, and document with photos for your record.
French & Double Doors
Signs you need it
Your original aluminum French doors leak at the center meeting stile, the multipoint lock has corroded internally, or you need HVHZ-compliant impact glass for a permitted patio door replacement.
What it costs in Wilton Manors
French and double door installation in Wilton Manors typically runs $2,200 to $4,500 per opening, with impact-rated laminated glass, multipoint hardware, and masonry infill for corroded frames at the upper end.
How we do it
We extract the old frame system, measure the actual rough opening after corrosion removal, install the new impact-rated French door with adjustable hinges and multipoint lock, verify operation and drainage, and provide the photo record.
What Door Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Hurricane-proof front & entry door | $1,800 - $3,500 per door |
| French & double door system | $2,200 - $4,500 per opening |
| Frame reconstruction / masonry infill | $200 - $500 per opening |
Do I need a permit to replace my front door in Wilton Manors?
Yes - any exterior door replacement in Wilton Manors’ HVHZ zone requires a building permit and Miami-Dade NOA-certified impact product, which we source and document. Call (754) 714-7309 for a free measured survey and written quote.
Can you match my door to the original 1960s style?
We can specify Therma-Tru or ViewLux impact-rated fiberglass doors in period-appropriate panel configurations with modern HVHZ performance - the look is documented in the measured survey before order. Call (754) 714-7309 to review options.
Energy-Efficient Windows in Wilton Manors
Energy-efficient windows in Wilton Manors address the thermal load from unshaded canal-adjacent homes where original single-pane jalousie windows transmit heat and UV with no resistance. The combination of South Florida sun and year-round humidity means glazing performance directly affects cooling costs, and we specify by U-factor and SHGC numbers rather than generic claims. Our Energy-Efficient Windows hub breaks down how we match glass performance to your home’s orientation and shading.
Low-E & Argon Gas Glass
Signs you need it
Your current windows create hot spots on interior floors and walls, your cooling system runs continuously mid-day, or you can feel radiant heat through the glass on south and west exposures.
What it costs in Wilton Manors
Low-E with argon gas upgrade in Wilton Manors typically adds $80-$150 per opening to the base window price, with hard-coat Low-E for coastal UV exposure specified as standard on ECO Window Systems and CWS lines.
How we do it
We measure each opening’s solar exposure, specify the appropriate Low-E coating and argon fill by orientation, install with warm-edge spacers to prevent seal failure in high humidity, and document the glazing spec in your photo record.
Insulated Laminated Glass
Signs you need it
You want impact protection plus thermal performance in one unit, your current laminated glass lacks an insulating airspace, or you’re replacing failed IGUs in existing impact windows.
What it costs in Wilton Manors
Insulated laminated glass in Wilton Manors typically ranges from $850 to $1,500 per opening as a complete unit, combining impact-rated laminated outer lite with Low-E inner lite and argon fill for full HVHZ and energy compliance.
How we do it
We verify the existing frame condition for IGU replacement or specify new insulated laminated units for full replacement, order from PGT or ES Windows with documented U-factor and SHGC ratings, and install with proper edge clearances for South Florida expansion.
What Energy-Efficient Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Low-E & argon gas upgrade | $80 - $150 per opening (add-on) |
| Insulated laminated glass unit | $850 - $1,500 per opening |
| Full energy-efficient impact window | $750 - $1,350 per opening |
Will energy-efficient windows lower my cooling bill in Wilton Manors?
Properly specified Low-E and argon-filled impact windows typically reduce solar heat gain by 40-60% on west and south exposures, which directly reduces cooling load in Wilton Manors’ unshaded canal-adjacent homes. Call (754) 714-7309 for a measured survey and written performance estimate.
Do energy-efficient windows still meet HVHZ requirements?
Yes - we specify ECO Window Systems and CWS lines that combine Miami-Dade NOA impact certification with documented U-factor and SHGC ratings, so one unit satisfies both code and efficiency requirements. Call (754) 714-7309 to review the glazing specs.
Impact Garage Doors in Wilton Manors
Impact garage doors in Wilton Manors must meet the same Miami-Dade NOA standards as windows and entry doors because the entire city sits in the HVHZ. Most original garage doors in these 1950s-’60s homes are uninsulated, non-impact steel or wood panels that fail wind-load requirements and create a major breach point during hurricane conditions. Our Impact Garage Doors hub details the wind-load ratings and installation standards we follow.
Hurricane-Rated Garage Doors
Signs you need it
Your current garage door lacks a Miami-Dade NOA label, the panels show rust or rot, or your homeowner’s insurance requires documented wind-load compliance for renewal.
What it costs in Wilton Manors
Hurricane-rated garage door installation in Wilton Manors typically ranges from $1,500 to $3,200 for a standard two-car opening, with reinforced track systems and impact-rated panel construction from Mr-Glass or ViewLux lines.
How we do it
We measure the opening and assess header condition, specify the wind-load-rated door and heavy-duty track system for your home’s exposure rating, install with proper spring balance and safety hardware, and provide the NOA documentation and photo record.
Wind-Load Code Compliance
Signs you need it
You’re replacing any garage door in Wilton Manors under permit, your existing door was installed before 1994, or the building department has flagged non-compliance during a sale or renovation inspection.
What it costs in Wilton Manors
Wind-load code compliance verification and garage door replacement in Wilton Manors typically runs $1,800 to $3,800 including permit, inspection, and any header or jamb reinforcement needed for the higher wind-load rating.
How we do it
We pull the permit, verify your home’s wind-borne debris region classification, specify the appropriate design pressure rating, reinforce the opening if needed, install the compliant door system, and pass final inspection with documented evidence.
What Impact Garage Doors Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Hurricane-rated garage door (2-car) | $1,500 - $3,200 per door |
| Wind-load compliance replacement | $1,800 - $3,800 per door |
| Header/jamb reinforcement | $300 - $700 per opening |
Does my garage door need to be impact-rated in Wilton Manors?
Yes - Wilton Manors’ full HVHZ status requires Miami-Dade NOA certification for all exterior openings including garage doors, and we pull permits and pass inspection as standard practice. Call (754) 714-7309 for a free measured survey and written quote.
Can I keep my existing garage door opener with a new impact door?
Most modern openers are compatible, but we verify horsepower and rail configuration during the measured survey - heavier impact-rated doors may require operator upgrade, which we document in the written scope before work starts. Call (754) 714-7309 to review your specific setup.
Custom & Geometric Windows in Wilton Manors
Custom and geometric windows in Wilton Manors solve the irregular openings created when corroded jalousie frames are removed from 1950s-’60s CBS block homes and the rough opening proves larger or more irregular than any standard unit accommodates. We also install shaped windows for architectural character in renovated Mid-Century Modern homes where the original design intent is being restored with modern HVHZ performance. Our Custom & Geometric Windows hub explains how we template and specify non-rectangular impact units.
Geometric & Shaped Windows
Signs you need it
Your home has original shaped or arched windows that need replacement, a standard rectangular unit won’t fit the corroded enlarged opening, or you’re restoring Mid-Century Modern character with HVHZ-compliant glass.
What it costs in Wilton Manors
Geometric and shaped impact window installation in Wilton Manors typically ranges from $1,200 to $2,800 per opening, with custom templating, Miami-Dade NOA-certified laminated glass, and specialized flashing for non-standard geometry.
How we do it
We create a physical or laser template of the actual opening after frame removal, specify the custom unit from PGT or CGI with documented NOA approval for the exact geometry, and install with custom flashing to maintain the water barrier at all angles.
Oversized Openings
Signs you need it
You’re combining multiple original jalousie openings into one larger window or door system, the corroded frame removal has created an opening larger than any stock unit, or you’re designing a new feature wall with maximum glass area.
What it costs in Wilton Manors
Oversized custom impact window or door systems in Wilton Manors typically run $2,500 to $6,000 per opening depending on span, design pressure rating, and whether structural lentil or header modification is required for the increased load.
How we do it
We consult with a structural engineer if header modification is needed, template the exact opening, specify the oversized unit with reinforced frame and laminated glass from ES Windows or Mr-Glass, and coordinate installation with the documented structural and glazing specifications.
What Custom & Geometric Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Geometric & shaped impact window | $1,200 - $2,800 per opening |
| Oversized custom opening system | $2,500 - $6,000 per opening |
| Structural header modification | $800 - $2,000 per opening |
How long does custom window templating take in Wilton Manors?
Physical templating happens during our measured survey visit, with custom units typically manufactured in 4-6 weeks from PGT or CGI - we document the exact template and provide a written price before ordering. Call (754) 714-7309 to schedule templating.
Can you match a custom shape to my 1958 home’s original design?
We template the existing opening or historical photo, specify Miami-Dade NOA-certified units in the original geometry, and document the match in your measured survey - Mid-Century Modern restorations are common in Wilton Manors’ 1950s-’60s housing stock. Call (754) 714-7309 to review your specific design.
Brands We Service in Wilton Manors
We install from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what the opening requires, not by what is in stock. Common hardware, weatherstripping, and glazing components for Wilton Manors’ high-humidity environment are stocked at our Miami (South FL) office, with most repair and replacement parts available within 24-48 hours. See our brands for full product specifications and performance data.
Pricing for Windows & Doors in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung impact window | $650 - $1,100 per opening |
| Horizontal Roller impact window | $700 - $1,200 per opening |
| Hurricane-proof front & entry door | $1,800 - $3,500 per door |
| French & double door system | $2,200 - $4,500 per opening |
| Low-E & argon gas upgrade | $80 - $150 per opening (add-on) |
| Insulated laminated glass unit | $850 - $1,500 per opening |
| Hurricane-rated garage door (2-car) | $1,500 - $3,200 per door |
| Geometric & shaped impact window | $1,200 - $2,800 per opening |
| Oversized custom opening system | $2,500 - $6,000 per opening |
| Masonry infill / frame reconstruction | $150 - $500 per opening |
Prices in Wilton Manors increase when corroded aluminum frames require masonry infill or when custom sizing is needed for enlarged rough openings - both are common in the city’s 1950s-’60s housing stock. The written price from our measured survey is the final invoice price; Haven Clause 1 means no change orders for conditions we document before work starts.
Neighborhoods We Serve in Wilton Manors
We measure, install, and service windows and doors across Wilton Manors’ residential grid, from the Middle River canal-front blocks to the interior CBS ranch neighborhoods. Scheduling and dispatch are coordinated from our Miami (South FL) office, with crews typically arriving within agreed windows across the city.
- Central Wilton Manors (original 1950s-’60s core)
- Middle River Estates (canal-adjacent blocks)
- Wilton Drive corridor (mixed residential)
- North Wilton Manors (eastern CBS ranch homes)
- South Wilton Manors (near Andrews Avenue)
Service Area - Cities Near Wilton Manors
Our crews serve Wilton Manors and surrounding Broward and Miami-Dade communities from our Miami (South FL) office, with measured surveys and installations available in Hollywood, FL, Pembroke Park, FL, Miami Gardens, FL, and Cooper City, FL. Every job in these markets follows the same Haven Standard: written price before work starts, verified crews, and documented photo evidence on completion.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wilton Manors
Our phones are answered by a live person 24/7, and we schedule measured surveys and installations throughout the week including Saturdays; Sunday appointments are available by arrangement for active projects. The written quote from your survey is valid for 30 days regardless of when we measure.
Some Wilton Manors neighborhoods have architectural review requirements; we provide Miami-Dade NOA documentation, product cut sheets, and color samples for your submittal, and we coordinate with your HOA manager if approval timing affects the installation schedule.
All of Wilton Manors is within the HVHZ, so any permitted window or door replacement requires Miami-Dade-approved impact-rated products - we verify this status when pulling your permit and specify only NOA-certified units, with the documentation included in your project file.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.