CGI Impact Garage Doors Nationwide | Sightline Windows & Doors Hollywood

CGI Impact Garage Doors: The Hollywood Owner’s Guide

CGI impact garage doors in Hollywood typically run $2,800-$6,400 installed, depending on size, wind-load rating, and whether we’re retrofitting a mid-century opening or working with new construction rough dimensions. We stock CGI-compatible panels, hardware kits, and torsion systems for same-day assessment, with most replacements measured, ordered, and installed within 5-10 business days under the Haven Standard. Most Hollywood owners discover a problem when the door hangs crooked, the opener strains, or they spot rust bleeding from the bottom seal after a wet season.

Call (754) 714-7309

Which CGI Models This Applies To

CGI manufactures impact-rated garage doors under several series that circulate through Hollywood, particularly in the Oakridge and Emerald Hills areas where 1950s-1970s homes are being retrofit to current Miami-Dade HVHZ standards. The most common we encounter are the CGI 3100 Series (aluminum impact-rated), the 5100 Series (heavy-duty commercial-grade), and the 7100 Series (thermally broken with polyurethane core). Each carries a wind-load sticker, usually on the interior face of the top panel or the track mounting bracket, showing the design pressure in psf and the Florida Product Approval number.

To identify your exact part, check three things: the sticker’s FBC or Miami-Dade approval code, the panel thickness (typically 1-3/8″ or 2″ for residential CGI), and the track profile, which changed slightly around 2019 when CGI moved from 2″ to 3″ heavy-duty galvanized steel on higher wind-load units. We match OEM hardware where the series is still current. For discontinued lines, we source aftermarket equivalents from Clopay or Amarr that meet the same DP rating, documented in writing before any work starts. We are an independent service provider, not affiliated with CGI.

Signs Your CGI Impact Garage Door Is Failing

• The door binds or jerks in the tracks. Usually the rollers have flattened or the horizontal track has bowed from repeated wind-loading. In Hollywood’s salt air, we see this inside seven years on coastal-facing garages.
• Rust streaks from the bottom seal or panel joints. The vinyl seal gasket hardens in Florida UV, letting rainwater wick into the aluminum skin-to-core bond. Once corrosion starts at the bottom rail, it travels upward.
• Opener labors or reverses unexpectedly. The torsion spring has lost tension, or the cable drum is slipping. CGI’s heavier impact panels need precise spring calibration; an under-sprung door burns out the opener motor inside two seasons.
• Visible daylight around the perimeter when closed. The weatherstripping has compressed or the panel alignment has shifted. This defeats the impact rating and lets conditioned air escape, which shows up on FPL bills.
• Dents that haven’t been repaired after a named storm. Even small deformations in an impact-rated panel compromise the design pressure rating. Insurance adjusters in Hollywood have started flagging this on renewal inspections.

Before

After

Replacement Cost & What’s Included

What moves the number: whether the rough opening is plumb and square (many Hollywood homes built 1955-1975 are not), whether the existing frame can accept the new wind-load hardware, and whether we need to relocate the opener mounting bracket. Every quote is itemized in writing before work starts, per Haven Clause 1. The 365-Day Done Right Promise covers labor and installation; manufacturer defects go through CGI’s warranty channel, which we handle as part of the job.

DIY or Call Us?

There is one thing a homeowner can safely check: whether the door is manually operable with the opener disconnected. Pull the red release cord, lift the door halfway, and let go. If it drifts down, the torsion spring is fatigued. If it stays put, the problem is likely the opener or the track alignment.

Everything else carries real hazard. Torsion springs store roughly 10,000 foot-pounds of torque on a standard 16-foot door. Winding bars slip, and the resulting injury is not a bruise. We have replaced doors in Hollywood where a homeowner’s DIY spring attempt bent the header and turned a $400 repair into a $2,100 structural fix. We background-check and license-number our crews for this reason. If the spring, cable, or bottom bracket is involved, call (754) 714-7309 and we will measure it properly.

FAQs