Mr-Glass Window Installation Nationwide | Sightline Windows & Doors Hollywood

Mr-Glass Window Installation: The Hollywood Owner’s Guide

Mr-Glass window installation in Hollywood typically runs $340-$780 per opening depending on the series, with most retrofit projects completed in one working day. We stock Mr-Glass-compatible hardware and keep the common sash, frame, and glazing bead profiles on our trucks for Hollywood homes built between 1995 and 2020. Most owners discover a problem when the window won’t stay open, won’t lock flush, or they feel air movement at the meeting rail during a windy afternoon.

Call (754) 714-7309

Which Mr-Glass Models This Applies To

Mr-Glass produces several window lines that circulate in Hollywood, and the part you need depends on which generation you own. The 5000 Series single-hung and horizontal roller are the most common in Broward County retrofits; the 8000 Series impact-rated line appears in post-2005 builds west of I-95. Check the spacer bar or the hinge-side jamb for a stamped series number, or photograph the corner key profile if the label is painted over.

We match OEM Mr-Glass glazing beads, sash locks, and balance shoes where the series is still active. For discontinued lines, we fabricate compatible replacements from our stock of PGT, CGI, and CWS profiles rather than selling you a full sash assembly you do not need. The critical gotcha: Mr-Glass changed its balance shoe width from 5/8 inch to 3/4 inch in 2017, and ordering the older spec for a newer window will bind the sash. We measure the shoe track before anything gets ordered.

Sightline Windows & Doors Hollywood is an independent service provider; we are not affiliated with Mr-Glass. We source parts through verified distributors and fabricate what we cannot buy.

Signs Your Mr-Glass Window Installation Is Failing

• The sash drops or won’t stay raised. This usually means a broken coil balance or a detached balance shoe in the jamb liner. In Hollywood’s salt-air environment, the balance spring corrodes faster than inland specs predict, especially on east-facing windows.
• Visible daylight or air movement at the meeting rail. The interlock weatherstrip has compressed or the sash has settled out of square. We check the sill slope first; a level sill in Hollywood’s older frame construction is rarer than you’d expect.
• The lock cam won’t engage or spins freely. The keeper has shifted or the lock mechanism has stripped its zinc housing. Mr-Glass used two keeper screw patterns pre- and post-2014, and they do not interchange without drilling new pilot holes.
• Condensation between the glass panes. The insulating glass unit seal has failed. Hollywood’s thermal cycling, 90-degree days followed by 72-degree evenings, accelerates seal degradation. The fix is a full IGU replacement, not a wipe-down.
• The frame corners separate or the sill bows. This is structural. The window was likely shimmed against drywall rather than structural framing, or the original install skipped sill pan flashing. We document this with photos before quoting remediation.

Before

After

Replacement Cost & What’s Included

Here is what we charge for Mr-Glass window work in Hollywood, based on the measured survey we leave with you:

The range reflects part availability, whether we stock it, and whether the opening requires reframing. Every quote is the final invoice under Haven Clause 1; the price we write is the price you pay. Our 365-Day Done Right Promise covers the installation and the parts. You receive the measured survey, the written scope, and a documented photo record before we leave.

DIY or Call Us?

You can safely check a few things. Verify the lock is fully closed, look for debris in the balance shoe track, and confirm the weep holes at the sill are not clogged with paint or insect screen. Photograph any label or stamp you find; it saves time when you call.

Do not attempt to remove a sash with a broken balance. The remaining coil is under tension and can release suddenly. Do not drill new keeper holes without knowing which screw pattern your series uses; you will compromise the frame integrity. And do not pry an IGU out of its sash; the glazing beads snap in a specific sequence, and reversing it cracks the glass.

We carry Mr-Glass-compatible balances, locks, and glazing beads on our trucks for most Hollywood calls. If your series is obsolete, we fabricate the replacement from our stock. Call (754) 714-7309 to schedule your free estimate.

FAQs