Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Door Installation: The Hollywood Owner’s Guide
PGT door installation in Hollywood typically runs $1,800 to $4,200 for a standard replacement, with impact-rated units landing higher depending on the series and rough-opening condition. We stock PGT-compatible hardware, fasteners, and weatherseal for same-day service on most Winguard and Preferred series units. Most owners discover a problem when the door sticks in summer humidity, the multipoint lock won’t engage, or they spot daylight between the frame and the sash after a storm.
Which PGT Models This Applies To
PGT’s door lineup breaks into three main families, and the installation approach differs for each. The Winguard aluminum and vinyl series, including the 700 and 800 door lines, use reinforced interlocking frames with stainless steel hinges rated for HVHZ (High Velocity Hurricane Zone) loads. The Preferred series, sold more commonly in non-impact markets, uses a lighter aluminum frame with a different threshold profile. The Estate Collection, PGT’s thermally broken aluminum line, requires specialized compression anchors that don’t interchange with standard Winguard hardware.
To identify your unit, check the etched mark on the glass spacer or the sticker on the hinge jamb. The series code, frame depth, and glazing specification all need to match before we order. We carry OEM PGT hardware and select aftermarket equivalents where the spec meets or exceeds the original. For multipoint locks and hinge sets, we default to OEM. For weatherseal and sill caps, we often use a compatible aftermarket part that performs identically in South Florida’s UV exposure.
One compatibility gotcha: the Winguard 7410 sliding door and the 7420 look identical from the interior, but the 7420 uses a wider roller housing that won’t fit the 7410 track. We’ve measured both in Hollywood Hills kitchens where a previous installer guessed wrong.
Signs Your PGT Door Installation Is Failing

- The door drags or sticks seasonally. In Hollywood, summer humidity swells the sill track and compresses the weatherseal. If the roller carriage is worn or the threshold has settled, the sash binds against the frame. We check with a six-foot level on the sill first; if the reading is off more than 1/8 inch over the width, the installation has shifted.
- The multipoint lock won’t throw or retract smoothly. Salt air corrodes the internal cam and rod mechanism, especially on east-facing doors within a mile of the coast. The lock may feel stiff before it fails entirely. We stock the full PGT lock set, but sometimes only the deadbolt cam needs replacement.
- Visible gaps at the frame perimeter. This usually means the installation screws have backed out of the structural framing or the shim pack has compressed. In older Hollywood homes with cinder block construction, the tapcon anchors can work loose from thermal cycling. We re-anchor with stainless steel expansion bolts and reflash the exterior.
- Water intrusion at the sill after rain. The PGT sill pan and end dams are designed to drain to the exterior, but if the installation sealant has separated from the frame or the pan was never fully bedded, water pools inside. We document this with photos before we pull anything apart.
- Fogging between the glass lites. This is a glazing unit failure, not a frame problem, but the door usually needs to come out to replace the IGU properly. PGT’s warranty covers the glass for 10 years; we handle the paperwork and coordinate the replacement so the frame isn’t disturbed unnecessarily.
Before
AfterReplacement Cost & What’s Included
| Service Level | Price Range | What’s Included |
|---|---|---|
| Hardware replacement (lock, hinge, roller set) | $280 - $650 | OEM or spec-matched part, labor, adjustment, photo record |
| Sill/threshold repair or replacement | $450 - $980 | Removal, new sill pan, bedding, sealant, drainage test |
| Full door replacement (standard PGT unit) | $1,800 - $3,400 | Removal, disposal, new unit, installation, trim, cleanup |
| Full replacement (impact-rated Winguard) | $2,800 - $4,200 | Above plus HVHZ anchoring, permit, inspection coordination |
What drives the range: frame condition (rotted wood or corroded aluminum needs more prep), accessibility (second-story balcony doors in Hollywood Beach condos require different equipment), and whether the original installation was flashed correctly. We measure every opening with a laser and write the price before we load the truck. The quote you sign is the invoice you pay. Haven Clause 1.
Every installation carries our 365-Day Done Right Promise. If the lock doesn’t throw smoothly or the sill doesn’t drain, we return and correct it. The photo record from your job goes into your file, not our marketing folder.
DIY or Call Us?

There’s a short list of checks any owner can make safely. Verify the door isn’t obstructed by debris in the track. Tighten the visible screws on the handle set with a Phillips driver. Lubricate the lock mechanism with a dry graphite spray, not WD-40, which attracts grit. These take ten minutes and solve maybe 15% of the calls we get.
Everything else goes wrong fast. A PGT multipoint lock has four to six locking points connected by a stainless steel rod; if you remove the cylinder without supporting the rod, it drops into the frame cavity and the door won’t secure. Impact-rated doors weigh 80 to 120 pounds per panel; removing one without proper support risks injury and frame damage. And if you disturb the installation flashing without resealing it correctly, water enters the wall assembly and the repair becomes structural.
We’re not affiliated with PGT, but we install their products exclusively enough to know the spec sheets by memory. If you’re staring at a part number and a door that won’t close, call (754) 714-7309. We’ll read the label with you over the phone and schedule a measured survey if needed. Estimates are free. Second opinions on any written estimate are free too.
FAQs
In South Florida’s salt air and UV exposure, a properly installed PGT unit typically performs 15 to 20 years before major component replacement. Hardware may need attention at 8 to 12 years. We see faster wear on oceanfront properties in Hollywood Beach and slower aging inland near Stirling Road. Call (754) 714-7309 for an exact assessment of your unit.
Often, yes. Hardware, weatherseal, and threshold components are replaceable without disturbing the frame. If the frame itself is square and the glazing is intact, repair is usually the better value. We write both options on the quote so you can compare. Call (754) 714-7309 and we’ll inspect before recommending.
Most residential PGT door replacements in Hollywood take four to six hours from arrival to final walkthrough. Condos with balcony access restrictions or historic homes with non-standard rough openings add time. We schedule by the job, not by the hour, so the price doesn’t change if we hit a surprise. Call (754) 714-7309 to schedule.
We carry multipoint lock sets, roller carriages, hinge kits, weatherseal, and threshold components for Winguard and Preferred series doors. Specialized Estate Collection hardware and custom-size glazing units ship from PGT’s Venice, Florida facility with a lead time we disclose upfront. Call (754) 714-7309 with your model number and we’ll confirm same-day availability.
Sonia Raman grew up in Los Angeles and learned glazing and construction at Los Angeles Trade-Technical College before moving into the field full time. She has spent well over a decade measuring, ordering, and installing windows and doors across South Florida, including retrofit work on mid-century homes along Hollywood’s Historic Oakridge neighborhood. She is known specifically for reading manufacturer spec sheets against actual rough-opening dimensions before anything gets ordered - a habit that has kept callbacks low and lead times honest. Measure the opening, not your optimism.
Written by Sonia Raman, Owner, Sightline Windows & Doors Hollywood at Sightline Windows & Doors Hollywood, serving Hollywood and nearby areas.










Before
After
Before
After
Before
After