Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Energy-Efficient Windows in Hollywood: What to Know First
We install and service PGT energy-efficient windows in Hollywood as an independent PGT service provider. Most jobs run from measured survey to completion inside two weeks, and the written quote you receive before any work starts is the same document we invoice against. Typical PGT energy-efficient retrofits in Hollywood range from $680 to $2,400 per opening depending on series, glazing package, and whether the frame needs reframing.
This page is for homeowners who already own PGT windows and want lower cooling bills, less UV fading, or a failed unit replaced under the original warranty period or after. If you’re seeing fog between panes, rising FPL bills, or rooms that won’t stay cool despite the AC running flat, you’re who we wrote this for. Call (754) 714-7309 to schedule your free measured survey.
How PGT Products Fail - and How We Fix Them
- WinGuard and EnergyVue series: seal failure in laminated Low-E units. The south and west exposures common in Hollywood’s Oakridge and Emerald Hills neighborhoods cook the edge sealant. Moisture migrates in, you get fog that won’t wipe off, and the Low-E coating degrades from the inside. We measure the sightline and rough opening, then source the exact laminated insulated glass build from PGT or a verified IG fabricator - same spacer, same gas fill, same coating stack. We don’t guess at the spec.
- PGT 7700 Series single-hung: sash drift and air infiltration. The balance shoe wears where the tilt latch meets the jamb liner, especially on openings over 36 inches wide. The sash creeps down, the weatherstrip gaps open, and your cooling load jumps 15 to 20 percent on that opening alone. We replace the balance system with OEM-spec components and realign the tilt latches to factory clearance. If the frame is out of square from settlement, we document it in the photo record and flag it in writing before we proceed.
- Architectural Series casement: operator arm corrosion. Hollywood’s salt air gets past the screen and pits the zinc-coated operator after six to eight years. The crank gets stiff, then the sash won’t seal tight against the bulb gasket. We replace with stainless hardware where available, or we spec the PGT OEM operator and pack the pivot points with marine-grade grease. The sash compression test after install is non-negotiable.
- EnergyVue horizontal roller: track wear and roller collapse. The dual-wheel carriage on wider units flat-spots when the track accumulates grit from Hollywood’s limestone dust and seasonal pollen. The sash tilts, the pile weatherstrip loses contact, and you feel the heat pour in. We pull the sash, inspect the track for galling, replace the carriage with the correct load-rated wheel set, and vacuum the track before reassembly. No silicone spray - it attracts more grit.
- PGT vinyl line: frame expansion causing IG unit edge pressure. Hollywood’s afternoon frame temperatures hit 140°F on dark vinyl in July. The linear expansion stresses the insulated glass edge seal, especially where the IG sits in a pocket with minimal setting block clearance. We find cracked butyl at the corners during removal, order the replacement unit with adjusted edge clearances per PGT’s thermal expansion tables, and set it on EPDM blocks sized for the actual field condition. Measure the opening, not your optimism.
Our PGT Energy-Efficient Windows Process
- 1
Measured survey you keep. We record every rough opening dimension, frame squareness, and sightline measurement. You get a copy. This is the document the quote is built from.
- 2
Diagnosis with photo evidence. We photograph the failure mode, the label stamp, and any frame damage. If the PGT unit is under original warranty, we flag that and advise you on manufacturer claim procedure versus our repair path.
- 3
Parts decision: OEM or verified equivalent. For IG units, we default to PGT OEM when lead times are under three weeks. For hardware, we use PGT where the finish match matters; for balance systems, we use OEM-spec components from our verified supply chain. We document the source in your written scope.
- 4
Install with compression and operation testing. Every sash gets a smoke-pencil infiltration check and a digital gap measurement at the weatherstrip. Casements get torque-verified operator function. We don’t leave until the unit performs to spec.
- 5
Documented photo record and written invoice. The final photo set goes to you within 24 hours. The invoice matches the quote line for line. Haven Clause 5: No surprises.
- 6
365-Day Done Right Promise activation. The warranty is written, dated, and references this specific job by photo record number. If it’s not done right, we make it right.
Before
AfterWhat PGT Energy-Efficient Windows Costs in Hollywood
| Scenario | Typical Range |
|---|---|
| Single IG unit replacement, WinGuard or EnergyVue, standard size | $680 - $1,150 |
| Dual-unit replacement, large format or custom shape | $1,400 - $2,100 |
| Hardware overhaul: operator, balance, or roller carriage | $240 - $480 |
| Full sash and frame replacement, reframing required | $1,800 - $2,400 |
| Energy audit with blower-door and infrared documentation | $180 - $290 (credited toward install) |
What moves the price: unit size, whether the original PGT unit is still in production, accessibility (second-story with no balcony adds ladder time), and whether the rough opening needs reframing for square. We don’t quote until we measure. Bring us any competitor’s written estimate and we’ll review it at no charge. Call (754) 714-7309 for your free measured survey.
Why Hollywood Homeowners Call Sightline Windows & Doors Hollywood for PGT Work
We’ve installed and serviced 18,000+ openings since 2012, every one with a written price before work started and a documented photo record at completion. Sonia Raman reads manufacturer spec sheets against actual rough-opening dimensions before anything gets ordered - a habit that has kept callbacks low and lead times honest. Our technicians are background-checked, uniformed, and identified by license number before arrival. If PGT lead times stretch, we can cross-reference your performance requirements against CGI, CWS, ES Windows, or ECO Window Systems lines and show you the U-factor and SHGC comparison in writing. Calls are answered by a live person, 24/7. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy.
FAQs
No, if the repair uses OEM-spec parts and documented procedures - but PGT’s original warranty on glass and hardware has time limits that vary by product line and install date. We check your unit’s label stamp and warranty status during the measured survey, advise you whether a manufacturer claim is still viable, and if not, we quote our repair with its own 365-Day Done Right Promise. Call (754) 714-7309 and we’ll verify your warranty standing at no charge.
Standard IG units and hardware ship from PGT in two to three weeks; custom geometries or discontinued lines can run four to six weeks. We don’t start work until parts are in hand, and we confirm lead time in writing before you sign the scope. If your timeline is fixed, we can review equivalent-performance units from CGI or CWS with faster availability. Call (754) 714-7309 to discuss scheduling.
Repair makes sense when the frame is square, the weatherstrip channels are intact, and the IG failure is isolated. Replace when you have multiple seal failures in the same elevation, frame rot or corrosion, or when the PGT line is discontinued and parts are no longer stocked. We make the recommendation after the measured survey, with photos of the specific damage and a written comparison of repair versus replacement cost. Estimates are free.
Our crews train on PGT’s assembly details, hardware schedules, and warranty documentation as part of our eight-manufacturer certification rotation. Sonia Raman specifies PGT units by series and glazing package weekly, and we maintain current technical bulletins from the factory. You’re not getting a generalist who has to look up the part number. Call (754) 714-7309 to schedule with a PGT-experienced technician.
We measure the performance before and after where possible. The new IG unit’s U-factor and SHGC are printed on the NFRC label; we record those numbers in your job file and compare them to your old unit’s spec. For whole-home projects, we offer a blower-door and infrared audit that documents air leakage and surface temperature differentials. The audit cost is credited toward your install. Call (754) 714-7309 to add energy documentation to your scope.
Ready to stop overcooling rooms that won’t stay comfortable? Call (754) 714-7309 to schedule your free measured survey. We’ll bring the written price before any work starts, and we’ll leave a documented photo record when the job is done. Haven Clause 1: Have it in writing.
Written by Sonia Raman, Owner, Sightline Windows & Doors Hollywood at Sightline Windows & Doors Hollywood, serving Hollywood and nearby areas.