Custom Window & Door Order Cost - Free Measure, Exact Written Quote

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Custom Window & Door Order Cost in Hollywood, FL?

Custom window and door orders in Hollywood, FL typically run between $850 and $6,200 per opening, depending on size, glass specification, and whether the frame is impact-rated. Most homeowners in Hollywood who replace four to eight openings with impact-rated, custom-sized units land somewhere between $8,000 and $28,000 for the full project, including installation. That range reflects the Hollywood market in 2026 – imported material costs, Florida Building Code compliance, and South Florida’s mandatory impact or shutter requirements for any permitted opening in Broward County.

At Sightline Windows & Doors, the written price you receive before work starts is the price on the final invoice. That’s Haven Clause 1 – not a promotion, just how we’ve worked on every one of the 18,000+ openings we’ve touched since 2012.

Custom Window & Door Order Cost Breakdown (2026)

The table below reflects what Sightline sees in the Hollywood market across our eight manufacturer lines. Every range includes the unit and standard installation labor; permit fees and any structural modification are called out separately in the written scope.

A few things move numbers in either direction. On the low end, a straightforward same-slab replacement – where the rough opening matches a standard custom size and the existing frame is sound – keeps labor tight and lead time short. On the high end, geometric shapes (think the arched transoms common in the Mediterranean Revival homes near Hollywood Lakes) require templating, kiln-bent glazing, and fabrication times of four to eight weeks from the manufacturer. Any opening that requires changing the rough-opening size in a CBS (concrete block structure) wall adds masonry work billed per opening, and that scope is documented before a tool is lifted.

Glass specification alone can shift a unit’s cost by 20 to 35 percent. Low-E laminated glass with a U-factor below 0.30 and an SHGC (solar heat gain coefficient) below 0.25 is standard practice in Hollywood because of Florida Energy Code requirements and the city’s west-facing street grid that puts living rooms in direct afternoon sun. That glass costs more than basic clear laminated, but it directly reduces HVAC load – something insurance carriers and appraisers in Broward County recognize when your next renewal or inspection comes around.

What Affects Custom Window & Door Order Pricing in Hollywood, FL

• Opening shape and size: Rectangular openings in standard proportions cost the least to fabricate and install. Hollywood has a significant stock of 1950s and 1960s ranch homes in neighborhoods like West Lake and Driftwood that take standard custom sizes cleanly. Homes in Hollywood Hills or near the North Lake area often have non-rectangular transoms, curved sightlines, or oversized sliders that require templating at the factory – adding both lead time and cost.
• Impact rating and glass specification: Every permitted opening in Hollywood must meet Florida Building Code wind-load requirements for Broward County’s wind zone (140 mph design pressure in most residential areas). Impact-rated laminated glass – the kind that doesn’t require shutters – costs more per square foot than non-impact glass but is the standard Sightline specifies. Units with a higher DP (design pressure) rating, needed on upper floors or exposed coastal elevations, use thicker glazing packages that add to unit cost.
• Frame material and finish: Aluminum frames with a standard anodized or painted finish are the workhorse for Hollywood’s coastal humidity – PGT and CGI both offer marine-grade finishes that resist salt air. Fiberglass frames from Therma-Tru or ViewLux cost more upfront but require zero maintenance. Vinyl is the lowest entry price but performs differently in South Florida’s UV environment, and we’ll say so in the written scope before you decide.
• Structural conditions at the rough opening: Older Hollywood homes – particularly those built before 1980 in areas like Emerald Hills and Liberia – sometimes have deteriorated wood bucks inside masonry openings, or openings that were modified without permits. Our measured survey identifies this before pricing; the cost to address it is in the written quote, never added afterward.
• Number of openings and project scope: Manufacturers price custom orders by the unit, but installation labor has a project-level efficiency curve. A four-opening project in Hollywood typically costs more per opening than a twelve-opening project because mobilization, permitting, and site setup are spread over more units. The written scope shows the per-opening breakdown so you can see exactly what the scale is doing to the number.
• Lead time and current manufacturing backlogs: Custom-ordered units are built to your sightline measurements – they are not pulled from a warehouse. In 2026, lead times from PGT, CGI, and CWS for custom impact units in South Florida are running six to ten weeks from order confirmation. Geometric and radius units from ViewLux or Mr-Glass can run eight to fourteen weeks. Rush fabrication, when available, carries a premium of 12 to 18 percent on the unit cost.

Before

After

How to Get the Most from a Custom Window & Door Order in Hollywood

The single most useful thing you can do before committing to any custom order is request – and keep – a measured survey that doubles as the quote. That’s the document Sightline produces on every site visit: sightline dimensions for each opening, the glass specification written in U-factor and SHGC numbers, the product line and model called out by name, and the installed price per opening. If another contractor gives you a quote without those specifics, you don’t actually have a quote – you have an estimate that can change after fabrication begins.

A few other ways to protect the number:

• Pull the permit yourself and confirm the fee schedule with the City of Hollywood Building Department before signing anything. Permit fees in Hollywood are assessed per project and tied to declared valuation; a contractor who rolls permit costs into a lump sum without disclosing the line item is structuring the quote in a way that makes comparison difficult.
• Order all openings in one fabrication run when possible. Factory runs for custom units are priced by the batch. Splitting a twelve-opening project into two separate orders – because you want to phase the spend – typically costs $400 to $900 more in total than ordering everything at once. The written scope will show you both scenarios so you can decide with the numbers in front of you.
• Understand the SHGC tradeoff before specifying glass. In Hollywood’s climate, a lower SHGC (0.20 versus 0.27, for example) reduces your cooling load but increases glass cost by roughly $4 to $9 per square foot. For a south- or west-facing elevation – common on the streets running perpendicular to Hollywood Boulevard – that tradeoff often pays back in two to four years on a typical 2,000 square foot home. For a north-facing wall, the lower SHGC adds cost with minimal benefit. We call this out opening by opening in the scope.
• Bring us a competitor’s written estimate for a free second opinion. If you’ve already received a written quote from another installer in Broward County, we’ll review it at no charge and tell you exactly what we see – whether the glass spec is appropriate, whether the product line named can meet the required DP rating, and whether the number is in line with the 2026 Hollywood market. No sales pressure attached.
• Ask specifically about the 365-Day Done Right Promise before signing. Every Sightline project is covered by it – if anything installed isn’t right within a year of completion, we make it right. That’s written into the Haven Standard, not offered as a courtesy on a case-by-case basis. Verify that any contractor you consider has a comparable written guarantee, not just a verbal assurance.

For a free, written estimate on a custom order in Hollywood, call (754) 714-7309. A live person answers – not a voicemail queue – and the first step is always a measured survey, not a ballpark.

The Hollywood Market: What Makes Custom Orders Here Different

Hollywood sits between two regulatory environments that both affect custom window and door orders. The City of Hollywood Building Department administers its own permit process under Broward County’s local amendments to the Florida Building Code. That means a custom unit specified and permitted in Hollywood may carry different DP requirements than the same-sized opening would in, say, Hallandale Beach or Miramar – even though all three cities share the same general wind zone.

The coastal proximity matters more than many homeowners expect. Properties east of US-1 in Hollywood – particularly in the Central Beach and North Beach areas – sit inside Broward County’s high-velocity hurricane zone (HVHZ). Every glazing product installed in the HVHZ must carry a Miami-Dade Notice of Acceptance (NOA) or a Florida Product Approval, and not every manufacturer’s full line qualifies. When Sightline specifies a unit from PGT, CGI, or ECO Window Systems for a coastal Hollywood property, the NOA number goes into the written scope so you can confirm it independently before the order is placed.

Inland Hollywood – Hollywood Hills, Emerald Hills, the Oakridge Road corridor – is outside the strictest HVHZ boundary, but still requires impact-rated or shutter-protected glazing under current code. The practical difference is that a broader range of products qualifies, which gives us more flexibility on the glass package and sometimes on price. That distinction is worth knowing before you accept a quote that treats all Hollywood addresses the same way.

Salt air corrosion is a factor across all of Hollywood, not just beachfront. The marine-grade anodized aluminum frames that CGI and PGT specify for coastal South Florida are engineered for exactly this environment. We see frames on non-marine-grade aluminum units begin to show oxidation within three to five years in Hollywood’s humidity. It’s not cosmetic – oxidation at the frame corners eventually compromises the seal between the frame and the glazing unit. The higher upfront cost of a marine-grade frame is documented in the spec so you can weigh it against a lower-priced alternative with full information.

For a broader look at what a custom order involves from survey through installation in this market, the Custom Window & Door Order in Hollywood service page covers the full process. And if you’re comparing us to other options across South Florida, our home page outlines the full scope of what Sightline installs and where.

FAQs – Custom Window & Door Order Cost in Hollywood, FL

How much does a custom impact window cost in Hollywood, FL?

A custom impact window in Hollywood costs between $850 and $3,100 per opening installed, depending on size, shape, and glass specification. A standard single-hung or casement unit in a rectangular opening falls toward the lower end of that range; a large fixed-lite or picture window with low-E laminated glass and a U-factor below 0.30 sits toward the top. Geometric shapes – arched, radius, or trapezoidal – can run $1,800 to $5,500 per opening because they require factory templating and kiln-bent glazing. Call (754) 714-7309 for a written price specific to your openings – the estimate is free and the number on that document is the number on the invoice.

How long does a custom window or door order take in Hollywood?

Custom-ordered impact windows and doors in Hollywood typically take six to ten weeks from confirmed order to delivery at the job site, for standard rectangular units from PGT, CGI, CWS, or ES Windows. Geometric and radius units from ViewLux or Mr-Glass are running eight to fourteen weeks in 2026. That lead time starts after the measured survey is signed off and the written order is placed with the manufacturer – not from the date of your initial call. Permit processing through the City of Hollywood Building Department adds one to three weeks concurrent with fabrication in most cases, so the total timeline from signed quote to installation complete is usually ten to fourteen weeks for a standard project.

Does a custom window order in Hollywood require a permit?

Yes. Any replacement or new installation of a window or door in Hollywood, FL requires a permit from the City of Hollywood Building Department under the Florida Building Code. The permit fee ranges from $125 to $450 depending on project valuation, and the work must be inspected before the final sign-off. Sightline pulls the permit on your behalf – it’s included in the written scope as a separate line item so you can see the cost. All units we install carry a Florida Product Approval number or a Miami-Dade NOA, which is a code requirement for any glazing installed in Broward County.

Is it cheaper to repair an existing window or order a custom replacement in Hollywood?

For impact windows and doors in Hollywood, repair is rarely the lower-cost path once the glazing unit or frame seal is compromised. Replacing a broken glass pane in an impact-rated unit costs $300 to $800 per opening depending on the glass specification, and the unit must pass inspection afterward. If the frame itself is damaged, oxidized at the corners, or out of square, a repair that restores the original impact rating is frequently more expensive than a new custom-ordered unit – especially if the existing frame is a discontinued profile. The measured survey Sightline conducts will tell you which path makes financial sense for each opening, in writing, before any decision is made.

Can Sightline match a non-standard or historical window shape in Hollywood?

Yes, with the right manufacturer specified for the shape. Hollywood has a number of mid-century and Mediterranean Revival homes – particularly in Hollywood Lakes, the Broadwalk-adjacent streets, and parts of Liberia – that have arched transoms, octagonal accents, or oversized fixed-lite openings that no standard catalog unit fits. Sightline sources geometric and custom-profile units from ViewLux and Mr-Glass, both of which fabricate to template. The process begins with a physical template made at your home during the measured survey; that template travels to the factory and the unit is built to it. Lead times are longer (eight to fourteen weeks) and unit costs are higher ($1,800 to $5,500 per opening), but the installed result carries a full Florida Product Approval and is covered by the 365-Day Done Right Promise the same as any other opening we touch. Call (754) 714-7309 to schedule a survey for non-standard openings.

What is the 365-Day Done Right Promise and does it apply to custom orders?

The 365-Day Done Right Promise is written into the Haven Standard that governs every Sightline installation – including custom orders. It means that if anything we installed isn’t right within 365 days of job completion, we make it right. That applies to the installation workmanship, the sealant, the hardware operation, and the documented scope of work. It does not replace manufacturer warranties (which run separately on the glazing unit and frame), but it covers the gap between what the manufacturer warrants and what we did at your property. Every completed job also leaves a documented photo record – Haven Clause 4 (Evidence on Every Job) – so there is no dispute about conditions at completion.

Key Takeaways

• Custom window and door orders in Hollywood, FL cost $850 to $6,200 per opening installed, with most whole-home projects landing between $8,000 and $28,000.
• Impact rating, glass specification (U-factor and SHGC), and opening shape are the three biggest cost drivers – and all three are documented in the written scope before the order is placed.
• Hollywood’s coastal HVHZ designation (east of US-1) requires Miami-Dade NOA-certified products; inland Hollywood still requires impact-rated or shutter-protected glazing under Florida Building Code.
• Lead times in 2026 run six to ten weeks for standard units, eight to fourteen weeks for geometric shapes.
• Permits are required for all replacement and new installations in Hollywood and are pulled by Sightline as a documented line item in the written scope.
• Every Sightline project is covered by the 365-Day Done Right Promise and leaves a documented photo record – both written into the Haven Standard, not offered case by case.
• Sightline offers a free second opinion on any written estimate you’ve already received from a competitor – no obligation.

Sonia Raman leads Sightline Windows & Doors and has overseen the written-price, measured-survey process that has governed all 18,000+ of our installed openings since 2012. If you’re planning a custom window or door order in Hollywood and want a written price before anything else happens, call (754) 714-7309. A live person answers around the clock. The measured survey is free, the written quote is the document you keep, and the number on it is the number on the invoice.

Written by Sonia Raman, Owner at Sightline Windows & Doors Hollywood, serving Hollywood, FL since 2012.

Pricing reflects the Hollywood market as of 2026. Sightline Windows & Doors Hollywood offers free estimates – call (754) 714-7309.