Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Pembroke Park
Sliding and patio door installation in Pembroke Park, FL typically runs $2,800-$6,500 for a standard replacement and $4,200-$9,800 for impact-rated units, with most projects completed in two to three days after permit approval. Our crews serve Pembroke Park from our Miami (South FL) office, and we carry the full range of Miami-Dade/Broward NOA-rated products required for every opening in this High Velocity Hurricane Zone. Call (754) 714-7309 to schedule your measured survey; the written quote we leave with you is the same document that governs the installation.
Pembroke Park’s tight lots, shared driveways, and 1950s-1960s CBS ranch construction create staging and access challenges that out-of-area crews consistently underestimate. We’ve learned that a sliding door replacement here isn’t just a product swap; it’s a site logistics problem solved before the truck arrives.
Why Sightline Windows & Doors Hollywood Is Pembroke Park’s Preferred Sliding & Patio Doors Company
We’ve completed hundreds of installations across Broward County’s smallest municipality, and the pattern is clear: Pembroke Park homes reward preparation and punish assumptions. Our Sliding & Patio Doors in Pembroke Park team knows that a “standard” 6-foot slider becomes non-standard the moment we find the original jalousie frame mortared into the block wall.
Pembroke Park customers have left us detailed reviews citing our measured surveys, our documented photo records, and the fact that our crews arrive with license numbers visible and background checks completed under Haven Clause 3. We’re not guessing at your rough opening; we’re reading it with a laser and documenting every dimension you keep.
Response time to Pembroke Park is typically same-week for measured surveys, with installation scheduling coordinated around Broward County permit turnaround. Because we pull permits and pass inspections as standard practice, not as an add-on, your project doesn’t stall at the building department.
The local knowledge that matters most here: we know which Pembroke Park streets require parking variance coordination, which neighborhoods have active HOA architectural review, and how to stage material delivery on a 50-foot lot without blocking your neighbor’s driveway. That knowledge is written into your scope before we start.
Our Sliding & Patio Doors Services in Pembroke Park

Patio Doors
Standard patio door replacement in Pembroke Park starts around $2,800 for a quality vinyl or aluminum unit, climbing to $4,500 for thermally broken frames with low-E glazing. Most Pembroke Park homes in the Lake Forest area and along SW 52nd Avenue still run original sliders with single-pane glass and corroded rollers; the upgrade to a modern multi-point lock system and tandem roller track is immediate and measurable. We specify by opening requirements, not by what’s in the warehouse.

Impact Sliding Glass Doors
Impact sliding glass doors are the only legal replacement option for Pembroke Park’s HVHZ designation, and they run $4,200-$7,800 depending on frame material, glass makeup, and opening size. Every unit we install carries a current Miami-Dade/Broward NOA; we verify the sticker at delivery and photograph it for your record. The intense afternoon thunderstorms that roll through Pembroke Park from March through October test these seals constantly, and we’ve found that laminated glass with a warm-edge spacer outperforms basic IGUs in this specific climate.

Sliding Glass Door Replacement
Sliding glass door replacement in Pembroke Park is where our local experience pays most clearly. The original units in 1950s-1960s CBS ranches were often set into painted steel frames that have corroded into the stucco, or worse, were installed after the jalousie windows with inconsistent rough openings. We recently replaced an original jalousie window and failing sliding glass door on a CBS ranch in the Lake Forest neighborhood of Pembroke Park. Our tech had to chip out the mortared louver frame and grind the block to fit a PGT impact sliding glass door with a Miami-Dade NOA, then we coordinated with the neighbor because the driveway is shared and staging required a parking variance. The homeowner saw immediate wind mitigation credits and a 25% drop in cooling costs thanks to the low-E insulated glass unit.

Impact French Patio Doors
Impact French patio doors in Pembroke Park range from $5,800 to $9,800, with multi-panel configurations and outswing designs at the higher end. These units are increasingly specified in Pembroke Park’s smaller homes because the narrow swing footprint suits tight floor plans better than a full slider, and the divided-lite aesthetic matches the mid-century ranch vernacular. We source from Therma-Tru and ECO Window Systems for this category, specified by performance tier and price range, not by margin.

Screen Door Installation
Screen door installation as part of a sliding door package in Pembroke Park typically adds $380-$620. We use extruded aluminum frames with stainless steel mesh in coastal applications; the salt air at 3-4 miles from the Atlantic coast corrodes standard fiberglass mesh within two seasons.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Pembroke Park
We draw from eight verified manufacturer lines for every Pembroke Park project: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For this market, we most often specify ES Windows and ECO Window Systems for impact sliding doors in the mid-range performance tier, and Therma-Tru for French patio door configurations where aesthetic detail matters. We don’t stock “local parts” in the traditional sense; we order to the measured survey, which eliminates the mismatch between what’s on the truck and what your opening actually requires. Turnaround from survey to install is typically 10-14 business days for standard sizes, 18-24 days for custom or oversized units requiring NOA verification.
Common Sliding & Patio Doors Problems We See in Pembroke Park Homes

- Original jalousie windows mortared into CBS block cause water intrusion and rot around sliding door frames, leading to seal failure and mold. The louvered units were never flashed for modern water management, and decades of tropical rainfall have saturated the adjacent framing. We find this on nearly every 1950s-1960s ranch in Pembroke Park, particularly where the original slider was added as a retrofit.
- Tight lots with shared driveways make it impossible to stage a truck and dumpster without blocking neighbors, delaying projects and risking fines. Pembroke Park’s 50-foot lots and zero-lot-line construction mean we coordinate staging with written neighbor notice and, when required, a temporary parking variance from the town. Out-of-area crews who don’t account for this in the quote end up with change orders or aborted delivery days.
- HVHZ wind-borne debris zone requires large-missile rated glazing, but many existing sliding doors have non-impact glass that shatters under design pressure. Every replacement in Pembroke Park must meet the same standard as a new build; we see a lot of 1980s-era sliders with tempered glass that meets old codes but fails current HVHZ requirements. The upgrade is not optional, and the permit inspection will flag it.
- Non-impact legacy sliding doors suffer accelerated seal failure from Pembroke Park’s intense afternoon thunderstorms and hurricane-season rain infiltration. The combination of high humidity, driving rain, and salt air degrades butyl seals in 7-10 years versus 15+ inland. We specify warm-edge spacers and dual-seal construction as standard for this climate.
Pricing for Sliding & Patio Doors in Pembroke Park, FL
A typical patio door replacement in Pembroke Park runs $2,800-$4,500 for non-impact units and $4,200-$7,800 for impact-rated sliding glass doors. Impact French patio doors start around $5,800 and can reach $9,800 for multi-panel configurations with custom hardware. Screen door additions range $380-$620.
What moves the number: frame material (vinyl, aluminum, thermally broken aluminum), glass makeup (laminated, insulated, low-E coatings), opening size and condition, and the labor required to create a clean buck from a mortared jalousie rough opening. That last factor is the one flat-rate quotes from out-of-area contractors miss; we’ve seen $800-$1,400 in unanticipated masonry work on Pembroke Park jobs that were “priced by the door.”
Our measured survey documents every variable before you commit. The written price we leave with you is the price on the final invoice. Haven Clause 1, in writing, since 2012. Call (754) 714-7309 for your free estimate.
We Also Serve Cities Near Pembroke Park

Our Sliding & Patio Doors crews work throughout Broward and northern Miami-Dade, including Hollywood, Miami Gardens, Cooper City, and Fort Lauderdale. Each city carries its own permit requirements and housing stock patterns; we adjust the measured survey and product specification accordingly, never recycling a scope from one jurisdiction to another.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Pembroke Park

Yes. Pembroke Park sits fully within Broward County’s High Velocity Hurricane Zone, and every replacement window and door must carry a current Miami-Dade/Broward Notice of Acceptance. We verify the NOA sticker on every unit before delivery and photograph it for your documented record. Call (754) 714-7309 to confirm your product selection meets current code.
It adds coordination steps that flat-rate quotes typically ignore. We survey your access, notify neighbors in writing when required, and arrange staging to avoid blocking shared driveways; on some Pembroke Park lots, this means off-site material delivery with hand-carry to the opening. The measured survey we leave with you includes this logistics assessment. Call (754) 714-7309 and we’ll walk your specific site.
Yes, and this is one of the most common retrofits we perform in Pembroke Park. The original jalousie frames are typically mortared directly into the CBS block, so we grind or chip to create a clean buck, then flash and seal for the new impact-rated slider. It’s more labor than a standard replacement, but it’s documented in your written scope before work starts. Call (754) 714-7309 for a measured survey of your opening.
Most Pembroke Park homeowners see wind mitigation credits that reduce premiums 10-25%, depending on carrier and existing discounts. The key is the Miami-Dade NOA and proper installation documentation; we provide both, plus the photo record insurers increasingly require for credit verification. Call (754) 714-7309 and we can review your current policy for applicable credits.
We specify from eight verified lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Pembroke Park’s HVHZ requirements, we most often install ES Windows and ECO Window Systems in the impact sliding door category, selected by opening performance requirements and your price range, not by warehouse availability. Call (754) 714-7309 to review specifications and pricing.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Pembroke Park since 2012 under the Haven Standard.










Before
After
Before
After
Before
After