Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Sunrise
Sliding and patio door replacement in Sunrise typically runs $2,800-$6,500 for impact-rated units, with most measured surveys completed within 48 hours and installs scheduled once HOA and permit approvals clear. Because Sunrise sits entirely within Broward County’s High Velocity Hurricane Zone, every replacement must carry Miami-Dade NOA or Florida Product Approved certification, and the city’s dense 1965-1990 master-planned lots make access, staging, and neighbor coordination as critical as the door itself. Call (754) 714-7309 to schedule your free measured survey. Our crews serve Sunrise from our Miami office, with dispatch coordinated for local Broward scheduling.
Why Sightline Windows & Doors Hollywood Is Sunrise’s Preferred Sliding & Patio Doors Company
We’ve completed thousands of installations across Broward since 2012, and Sunrise’s specific conditions, original aluminum slider stock, and HOA-governed neighborhoods represent a significant share of our measured surveys. Our Sliding & Patio Doors team knows the difference between a Sawgrass Lakes color-approval packet and a Welleby HOA architectural review, and we build that time into every written quote.
Our Sunrise customers leave reviews that mention the same details: the measured survey they keep, the photo record we send, and the fact that the final invoice matches the written price from day one. The 365-Day Done Right Promise, stamped under Haven Clause 5, covers every job, not offered as a courtesy.
Response time to Sunrise is typically next-day for measured surveys, with installs scheduled once permits and any HOA approvals are in hand. We don’t promise speed we can’t document; we promise a written scope, a verified crew, and evidence on every visit.
Local knowledge matters here because Sunrise isn’t a generic suburb. The city’s eastern corridors still carry original jalousie windows in Florida rooms, a call type that barely exists in newer west-Broward cities like Weston. Our technicians have converted hundreds of these to impact-rated sliders, navigating the specific framing conditions of 1970s CBS construction.
Our Sliding & Patio Doors Services in Sunrise
Impact Sliding Glass Doors
Every impact sliding glass door we install in Sunrise meets HVHZ standards with Miami-Dade NOA or Florida Product Approved certification, rated for the 140-150 mph design wind speeds that apply even 15 miles inland. We specify PGT and CGI lines by performance tier and price range, not by margin. On a typical Sunrise CBS home with a failed original aluminum slider, we measure the rough opening, document the sill condition, and quote the laminated glass interlayer and low-E coating that cut heat gain. The measured survey becomes your written price; no change orders, no surprises.
Sliding Glass Door Replacement
Replacement is the core of our Sunrise work, and it’s rarely straightforward. Original aluminum slider frames fail at the sill and weep holes after decades of horizontal wind-blown rain, letting water track under the threshold and mold the interior drywall. We can’t set a new unit in a rotted jamb. Our survey includes frame readings, moisture mapping, and a photo record of the damage. If the opening needs reframing, it’s in the written scope from day one. Dense Sunrise lots mean the sliding panel often can’t be lifted out through the yard; on zero-lot-line and 2-4 story garden condos we’ve had to crane or rig over the building, which changes staging, parking, and the quote.
Impact French Patio Doors
French patio doors in Sunrise must meet the same HVHZ standards as sliders, with multi-point locking hardware and impact-rated glazing. We stock Therma-Tru and ViewLux lines specified by what the opening requires. HOA-governed communities, which cover a large share of Sunrise neighborhoods, add approval requirements around frame color, grid patterns, and exterior appearance that we navigate before pulling permits. The color sign-off comes first; an HVHZ-compliant door can still get rejected at final inspection if the aesthetic doesn’t match the community’s recorded standards.
Screen Door Installation
Screen doors on Sunrise patios face the same humidity and wind-blown rain that corrode primary frames, and we install them as matched systems with the sliding unit, not aftermarket add-ons. The screening material, frame finish, and roller hardware are specified in the same written quote as the door itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Sunrise
We draw from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Sunrise’s HVHZ requirements, we most often specify PGT and CGI for impact sliding glass doors, Therma-Tru for French patio systems, and ViewLux where the opening calls for specific performance values. We don’t push stock; we specify by U-factor, SHGC, and missile rating what the opening needs. Local parts availability means replacement hardware, roller assemblies, and screen frames turn around fast without special-order delays.
Common Sliding & Patio Doors Problems We See in Sunrise Homes
- Seal failure and water infiltration in original aluminum frames. Broward’s intense daily summer convection storms drive wind-blown rain horizontally into aging sliders, and the region’s high humidity accelerates aluminum corrosion. The result is interior mold on drywall around sills, often hidden until the frame is opened.
- Corroded weep holes and threshold rot. Original 1970s-1980s Sunrise sliders were built with weep systems that clog with debris and salt, letting water pool in the track and migrate into the subfloor. Replacement requires sill reconstruction, not just a new unit dropped in.
- HOA rejection at final inspection for color or grid mismatch. Many Sunrise communities require pre-approval of frame color and grid pattern before the permit is even pulled. We build this sequencing into every quote for HOA-governed neighborhoods.
- Access constraints on dense lots. Because Sunrise was master-planned in dense 1965-1990 blocks, most sliding-door replacements are staged from a driveway barely 8 feet from the neighbor’s CBS wall. Curb-to-opening path, shared-wall protection, and HOA color approval routinely matter more than the unit itself.
Pricing for Sliding & Patio Doors in Sunrise, FL
A typical impact sliding glass door replacement in Sunrise runs $2,800-$4,200 for a standard 6-foot opening with laminated glass interlayer and low-E coating. Impact French patio doors range $3,500-$6,500 depending on width, hardware grade, and whether the opening requires reframing. Screen door systems add $400-$800 when paired with a primary unit.
What moves the price: sill condition and any rot repair, crane or rigging needs on zero-lot-line or condo jobs, HOA approval timeline, and permit complexity. Every quote is written before work starts, based on the measured survey you keep. We also offer a free second opinion on any competitor’s written estimate. Call (754) 714-7309 for your measured survey.
We Also Serve Cities Near Sunrise
Our crews work across Broward and north Miami-Dade, including Sliding & Patio Doors in Sunrise and neighboring Hollywood, Pembroke Park, Miami Gardens, and Cooper City. Each city’s permit office, HOA landscape, and housing stock differ, and we adjust our surveys accordingly.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Sunrise
Most original Sunrise sliders are single-pane aluminum units from the 1970s-1980s with corroded frames, failed seals, and no impact rating, and repair parts for those systems haven’t been manufactured in decades. The aluminum extrusions, roller hardware, and weatherstripping are obsolete, and even a functional repair leaves you with a non-HVHZ door that insurers increasingly refuse to cover. Call (754) 714-7309 and we’ll show you the frame readings and moisture damage in our measured survey.
Staging space, neighbor notification, and equipment access are line items on most Sunrise quotes because dense lots limit how we move the old unit out and the new unit in. On a cul-de-sac off Sunset Strip in the older eastern Sunrise corridor, our crew swapped a corroded single-pane aluminum slider for a PGT impact sliding glass door with laminated glass interlayer and low-E glass, but the real job was access: we laid plywood over the lawn to protect the neighbor’s lawn, kept the tear-out inside a tarped staging zone in the driveway, and scheduled the noisiest work inside Sunrise’s work-hour window. The original aluminum frames had seal failure and water staining on the interior drywall, and the homeowner cut roughly 20-30 percent off monthly cooling after the switch. Crane or rigging adds $800-$2,500 depending on reach and parking closure needs.
Yes, if your home is in an HOA-governed community, and a large share of Sunrise neighborhoods are. HOA and overlay approval around frame color and grid pattern comes before the permit in many Sunrise communities, and if the color isn’t signed off first, an HVHZ-compliant door can still get rejected at final inspection. We include HOA submission in our project timeline and quote; the measured survey notes any recorded community standards that affect specification. Call (754) 714-7309 to review your community’s requirements.
A large-missile rating means the door has been tested to withstand impacts from a 9-pound 2×4 lumber missile at 50 feet per second, simulating wind-borne debris in a hurricane. Because Sunrise falls entirely within Broward County’s HVHZ, every replacement sliding door must carry this rating or its small-missile equivalent depending on height and exposure. We specify PGT and CGI lines with documented NOA certificates that list the exact missile rating, and we include that documentation in the permit packet we file for you.
Homeowners switching from original single-pane aluminum sliders to impact-rated low-E units typically see 20-30 percent reductions in cooling costs, though your exact savings depend on home orientation, shading, and how many openings you replace. The low-E coating blocks infrared heat, and the laminated interlayer reduces air infiltration. We measure the before-and-after U-factor and SHGC on every quote so you can see the performance difference in writing. Call (754) 714-7309 for a free measured survey with documented performance specs.
Call (754) 714-7309 to schedule your free measured survey. You’ll receive a written price before any work starts, a background-checked uniformed crew identified by license number, and a documented photo record when the job is done, all under the Haven Standard’s 365-Day Done Right Promise.
Written by Sonia Raman, Owner at Sightline Windows & Doors, independently owned and operated under the Haven Standard since 2012.