Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Sunrise, FL
Window and door installation in Sunrise, FL typically runs $800-$2,400 per opening for standard impact-rated units, with full-home retrofits on 1970s-1980s CBS homes ranging from $12,000-$35,000 depending on opening count and product tier. Every job we handle in Sunrise starts with a measured survey you keep, and the written quote matches that document exactly. Call (754) 714-7309 to schedule your free estimate.
Sunrise’s housing stock presents a specific challenge: most homes were built before Florida’s post-Andrew code overhaul, meaning original single-pane aluminum sliders, jalousie windows, and hollow-core doors carry zero impact rating and cannot pass current HVHZ inspection. We replace these with Miami-Dade NOA or Florida Product Approved units from PGT, CGI, CWS, and other verified lines, pulling permits through Broward County and coordinating inspections so the job is documented from survey to final photo record.
Why Sunrise Homes Are Different
Sunrise sits roughly 15 miles inland, yet ASCE 7 still assigns design wind speeds of 140-150 mph here, placing the entire city inside Broward County’s High Velocity Hurricane Zone. That means no non-impact window or door can legally be permitted for installation, regardless of how far from the coast the property lies. The bulk of residential inventory was built between 1965 and 1990 as part of a master-planned buildout, yielding dense blocks of concrete block stucco homes and 2-4 story garden-style condominiums whose original aluminum-frame single-pane windows and sliding glass doors are now decades past useful life.
HOA-governed communities cover a large share of Sunrise neighborhoods, adding approval requirements around frame color, grid patterns, and exterior appearance that must be resolved before permits are pulled. Broward’s intense summer convection storms drive wind-blown rain horizontally into aging frames and degraded thresholds, while high humidity accelerates aluminum corrosion, causing seal failure and interior mold on drywall around sills. In the older eastern corridors, we regularly encounter jalousie windows in Florida rooms and utility areas; these units are now effectively uninsurable, cannot pass HVHZ inspection, and cannot be repaired with modern hardware, so converting them to impact-rated single-hung or sliding units is one of our most consistently requested jobs.
Our Main Sunrise Services
Sunrise homeowners call us most often for full window replacement and impact-rated door upgrades, though sliding and patio door conversions are nearly as common in the city’s older condominium stock.
Window Replacement in Sunrise
We replace original single-pane aluminum sliders, jalousie units, and failed horizontal rollers with impact-rated vinyl or aluminum-frame windows that meet Miami-Dade NOA standards. Every Sunrise job begins with a measured survey documenting each opening’s rough dimensions, frame condition, and sill integrity, and the written quote you receive is the same document our crew works from. Window Replacement in Sunrise covers full-home retrofits, partial replacements, and HOA-coordinated installations.
Impact Windows & Doors in Sunrise
Because Sunrise falls entirely within the HVHZ, every replacement must carry a Florida Product Approval or Miami-Dade NOA number, and insurance carriers are now requiring proof of impact rating for policy renewal. We specify PGT, CGI, CWS, and ES Windows products by performance tier and price range, pull permits through Broward County, and pass inspections with documented photo evidence. Impact Windows & Doors in Sunrise details the full retrofit process for pre-code homes.
Sliding & Patio Doors in Sunrise
Sunrise’s 1970s-1980s condominiums and townhomes often contain original sliding glass doors with corroded rollers, failed weatherstripping, and single-pane glazing that leaks during summer storms. We measure the daylight opening, specify impact-rated 2-panel or 3-panel replacements from ECO Window Systems or Mr-Glass, and coordinate with building management for limited-access installs. Sliding & Patio Doors in Sunrise covers the specific challenges of multi-family replacements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Sunrise
Most window installation jobs we handle in Sunrise involve retrofitting 1970s-1980s CBS homes and low-rise condominiums built before Florida’s post-Hurricane Andrew code overhaul, where original single-pane aluminum sliders and jalousie windows carry zero impact rating and cannot pass HVHZ inspection. The work requires Miami-Dade NOA or Florida Product Approved units, Broward County permits, and often HOA approval for frame color and grid pattern before we can schedule rough-in. Window Installation covers our full process from measured survey to documented completion.
Single & Double Hung Windows
Signs you need it
You feel drafts around the sash, the balance system no longer holds the window open, or you’re still running jalousie units that your insurance carrier has flagged for replacement.
What it costs in Sunrise
Single and double hung impact-rated window installation in Sunrise typically ranges from $850-$1,450 per opening for vinyl-frame units and $1,100-$1,800 for aluminum-frame upgrades.
How we do it
We remove the existing frame, inspect the rough opening for water damage or corroded aluminum, install the new impact-rated unit with Miami-Dade NOA-approved fasteners, seal with backer rod and polyurethane sealant, and finish with interior trim that matches your HOA’s appearance standards.
Horizontal Roller Windows
Signs you need it
The rollers grind or stick, the locking mechanism has corroded shut, or horizontal rain is forcing past the weatherstripping during summer convection storms.
What it costs in Sunrise
Horizontal roller impact window installation in Sunrise typically ranges from $900-$1,550 per opening for standard sizes and $1,200-$2,100 for oversized or high-performance laminated glass configurations.
How we do it
We measure the daylight opening and track depth, specify the roller system rated for the sash weight, install the frame plumb and level with shims at structural points, test operation under load, and document the install with photos before the county inspector arrives.
What Window Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Single/double hung vinyl impact window | $850 - $1,450 per opening |
| Single/double hung aluminum impact window | $1,100 - $1,800 per opening |
| Horizontal roller impact window | $900 - $1,550 per opening |
| Full-home retrofit (12-18 openings) | $12,000 - $28,000 |
How long does window installation take in Sunrise?
Most single-opening replacements complete in 2-4 hours; full-home retrofits on typical Sunrise CBS homes run 2-4 days depending on opening count and HOA access restrictions. Call (754) 714-7309 for a measured survey and exact timeline.
Will my HOA approve the window style?
We provide product data sheets, color samples, and Miami-Dade NOA documentation for your HOA architectural review before permits are pulled, and we’ve worked with most major Sunrise community associations. Call (754) 714-7309 to review your specific HOA requirements.
Door Installation in Sunrise
Door installation in Sunrise focuses on replacing hollow-core entry doors and non-impact sliding units in 1970s-1980s CBS homes and condominiums that cannot pass HVHZ inspection or meet current insurance requirements. The original doors in these pre-code builds offer minimal wind resistance, corroded hardware, and failed weatherstripping that admits wind-blown rain during Broward’s intense summer convection storms. Door Installation covers our measured survey process and product specification by performance tier.
Entry Doors
Signs you need it
The door rattles in moderate wind, daylight shows around the frame, or the jamb has swelled from repeated water infiltration.
What it costs in Sunrise
Entry door installation in Sunrise typically ranges from $1,800-$3,500 for impact-rated fiberglass units and $2,400-$4,800 for steel-frame or decorative glass configurations.
How we do it
We measure the rough opening and check the jack studs for rot, specify the pre-hung unit with Miami-Dade NOA rating, install with structural screws through the frame into framing members, and seal with backer rod and sealant before testing latch and deadbolt alignment.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance carrier has required proof of impact rating, or you’re replacing a door that failed inspection after a previous storm.
What it costs in Sunrise
Hurricane-proof front door installation in Sunrise typically ranges from $2,200-$4,200 for standard sizes and $3,000-$5,500 for oversized or custom panel configurations with decorative glass inserts.
How we do it
We specify Therma-Tru or ViewLux impact-rated units with laminated glass and reinforced jambs, pull Broward County permits, install with HVHZ-approved fasteners, and schedule county inspection with our photo documentation package.
What Door Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Entry door, impact-rated fiberglass | $1,800 - $3,500 |
| Entry door, impact-rated steel/decorative glass | $2,400 - $4,800 |
| Hurricane-proof front door, standard size | $2,200 - $4,200 |
Do I need a permit to replace my front door in Sunrise?
Yes, all exterior door replacements in Sunrise require a Broward County permit because the city is fully within the HVHZ, and the permit ensures the product meets Miami-Dade NOA or Florida Product Approval standards. We pull permits and schedule inspections as part of every job.
Can you match my HOA’s color requirements?
We provide factory color samples and custom paint-match options from our manufacturer lines for HOA architectural review before ordering, and we document the approved selection in your written scope. Call (754) 714-7309 to coordinate with your association.
Energy-Efficient Windows in Sunrise
Energy-efficient window installation in Sunrise addresses the specific penalty of single-pane aluminum frames in 1970s-1980s homes, where summer cooling loads peak for months and FPL bills reflect the thermal transfer through uninsulated glazing. The original windows in Sunrise’s master-planned communities were never designed for the R-value or solar heat gain control that current Florida code requires, and many homeowners are upgrading to meet both insurance mandates and utility cost targets. Energy-Efficient Windows details our performance-based specification process.
Low-E & Argon Gas Glass
Signs you need it
Your FPL bills spike June through September, or you feel radiant heat through the glass even when the window is closed.
What it costs in Sunrise
Low-E with argon gas upgrade in Sunrise typically adds $80-$150 per opening to the base impact window price, with total installed costs ranging from $950-$1,600 for vinyl frames.
How we do it
We specify the coating by climate zone for Broward’s cooling-dominated load, fill the insulated glass unit with argon at the factory, and verify the spacer system maintains seal integrity under HVHZ pressure cycling.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows for insurance compliance and want to capture the maximum utility rebate or federal tax credit available for the installation.
What it costs in Sunrise
ENERGY STAR certified impact window installation in Sunrise typically ranges from $1,000-$1,750 per opening, with whole-home packages running $14,000-$32,000 depending on opening count and performance tier.
How we do it
We verify the product’s NFRC label against ENERGY STAR’s South-Central climate criteria, document the U-factor and SHGC in your written scope, and provide the certification paperwork for your tax preparer.
What Energy-Efficient Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Low-E/argon upgrade (add to base window) | +$80 - $150 per opening |
| ENERGY STAR vinyl impact window | $1,000 - $1,750 per opening |
| Full-home ENERGY STAR package | $14,000 - $32,000 |
Will energy-efficient windows lower my FPL bill in Sunrise?
Most Sunrise homeowners see 15-25% cooling cost reduction after replacing single-pane aluminum windows with Low-E argon-filled impact units, with payback typically in 6-10 years depending on home size and thermostat habits. Call (754) 714-7309 for a load calculation with your estimate.
Do energy-efficient windows still meet HVHZ requirements?
Yes, all energy-efficient windows we specify carry Miami-Dade NOA or Florida Product Approval numbers and meet HVHZ standards; the Low-E coating and argon fill are added to impact-rated glass, not substituted for it. We document both ratings in your written scope.
Impact Garage Doors in Sunrise
Impact garage door installation in Sunrise is increasingly driven by insurance carriers requiring proof of wind-load rating for policy renewal, particularly in 1970s-1980s homes where original lightweight doors offer no protection against 140-150 mph design winds. The garage door is often the largest opening in a Sunrise home, and a failure here pressurizes the structure, which is why Broward County enforces HVHZ standards even for replacement doors on existing homes. Impact Garage Doors covers our wind-load specification and permit coordination.
Hurricane-Rated Garage Doors
Signs you need it
Your insurance inspection flagged the garage door, or you’re replacing a thin uninsulated panel that flexes visibly in moderate wind.
What it costs in Sunrise
Hurricane-rated garage door installation in Sunrise typically ranges from $2,800-$5,500 for single-car openings and $4,200-$7,800 for double-car with impact-rated glass panel options.
How we do it
We measure the opening and calculate the wind-load requirement from ASCE 7 for your specific Sunrise exposure, specify the door and track system with Miami-Dade NOA rating, and install with reinforced struts and heavy-duty hardware rated for the calculated load.
Wind-Load Code Compliance
Signs you need it
You’re selling the home and the buyer’s inspection requires documentation, or you’re retrofitting after a failed wind mitigation survey.
What it costs in Sunrise
Wind-load code compliance retrofit in Sunrise typically ranges from $3,200-$6,000 for standard residential openings, including permit, inspection, and documentation for your insurance or real estate file.
How we do it
We assess the existing frame and spring system for compatibility with the new door weight, upgrade to torsion springs rated for the heavier impact door, pull Broward County permits, and provide the NOA documentation and inspection report for your records.
What Impact Garage Doors Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hurricane-rated garage door, single-car | $2,800 - $5,500 |
| Hurricane-rated garage door, double-car | $4,200 - $7,800 |
| Wind-load compliance retrofit with permits | $3,200 - $6,000 |
Does my garage door need to be impact-rated in Sunrise?
Yes, all garage door replacements in Sunrise must carry Miami-Dade NOA or Florida Product Approval because the city is fully within the HVHZ, and insurance carriers are now requiring proof of rating at renewal. We specify, permit, and document every installation.
Can you reuse my existing garage door opener?
Most openers can be reused if they’re rated for the new door’s weight and have safety sensors that meet current UL 325 standards; we test and document opener compatibility during the measured survey. Call (754) 714-7309 to schedule inspection.
Custom & Geometric Windows in Sunrise
Custom and geometric window installation in Sunrise serves two distinct needs: replacing original shaped windows in 1970s-1980s homes with impact-rated equivalents that meet HVHZ standards, and creating new architectural openings in renovations where standard rectangles won’t serve the design. Sunrise’s older master-planned communities contain arched transoms, octagonal accent windows, and radius-topped units that were never engineered for modern wind loads, making custom fabrication essential for legal replacement. Custom & Geometric Windows covers our templating and specification process.
Geometric & Shaped Windows
Signs you need it
You have a trapezoid, octagon, or triangle window that has leaked for years, or you’re replacing a shaped unit that your insurance carrier has excluded from coverage due to non-impact rating.
What it costs in Sunrise
Geometric and shaped window installation in Sunrise typically ranges from $1,400-$2,800 for standard polygons and $2,200-$4,500 for complex multi-angle or radius configurations with impact-rated laminated glass.
How we do it
We create a physical template on-site, specify the custom vinyl or aluminum frame from ViewLux or ECO Window Systems with Miami-Dade NOA, fabricate to template dimensions, and install with custom flashing that matches the original exterior profile.
Arched & Curved Windows
Signs you need it
The radius top has separated from the rectangular base, or you’re converting a standard window to an arched unit to match neighboring homes in your Sunrise community.
What it costs in Sunrise
Arched and curved window installation in Sunrise typically ranges from $1,800-$3,200 for half-round or quarter-round tops and $2,800-$5,000 for full custom radius units with divided lite patterns.
How we do it
We measure the spring-line radius and rise with a digital template, specify the bent-frame unit with internal reinforcement for HVHZ loads, coordinate HOA approval for the altered appearance, and install with continuous head flashing.
What Custom & Geometric Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Geometric/shaped window, standard polygon | $1,400 - $2,800 |
| Geometric/shaped window, complex/radius | $2,200 - $4,500 |
| Arched window, half-round or quarter-round | $1,800 - $3,200 |
How long does custom window fabrication take?
Custom geometric windows typically require 4-6 weeks from template approval to delivery, with installation scheduled once the product arrives and HOA approval is documented. Call (754) 714-7309 to start the templating process.
Can you match the grid pattern on my existing windows?
We template the existing sightline and muntin spacing, then specify custom grid inserts or between-glass dividers from our manufacturer lines that replicate the pattern in impact-rated construction. Call (754) 714-7309 to review your specific window.
Brands We Service in Sunrise
We install and service eight verified manufacturer lines in Sunrise: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each product is specified by performance tier and price range for what the opening requires, not by what is in stock. We carry common hardware, weatherstripping, and screen components locally, and most non-warranty service calls complete within 48 hours. See our brands for full specifications.
Pricing for Windows & Doors in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Single/double hung vinyl impact window | $850 - $1,450 per opening |
| Single/double hung aluminum impact window | $1,100 - $1,800 per opening |
| Horizontal roller impact window | $900 - $1,550 per opening |
| Entry door, impact-rated fiberglass | $1,800 - $3,500 |
| Hurricane-proof front door, standard size | $2,200 - $4,200 |
| Low-E/argon upgrade (add to base window) | +$80 - $150 per opening |
| ENERGY STAR vinyl impact window | $1,000 - $1,750 per opening |
| Hurricane-rated garage door, single-car | $2,800 - $5,500 |
| Hurricane-rated garage door, double-car | $4,200 - $7,800 |
| Geometric/shaped window, standard polygon | $1,400 - $2,800 |
| Arched window, half-round or quarter-round | $1,800 - $3,200 |
| Full-home window retrofit (12-18 openings) | $12,000 - $28,000 |
Prices in Sunrise push toward the higher end when we encounter corroded aluminum frames requiring structural repair, HOA-mandated custom colors with extended lead times, or jalousie conversions needing enlarged rough openings. The written quote you receive before any work starts is the final invoice; Haven Clause 1 means no change orders, no surprises.
Neighborhoods We Serve in Sunrise
We handle window and door installation across Sunrise’s full residential footprint, from the older eastern corridors near Sawgrass to the master-planned communities west of the Turnpike. Most Sunrise properties are within 30 minutes of our Miami (South FL) dispatch office, and we schedule measured surveys within 2-3 business days of contact.
- Sawgrass Estates
- Welleby
- Sunrise Golf Village
- New Orleans Lakes
- Plantation Acres (Sunrise border)
Service Area - Cities Near Sunrise
Our crews serve the full Broward County corridor from our Miami (South FL) office, with regular installations in Hollywood, FL, Pembroke Park, FL, Miami Gardens, FL, and Cooper City, FL. Each city carries its own permit requirements and housing stock characteristics, and we coordinate inspections with the appropriate municipality for every job.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Sunrise
Most Sunrise neighborhoods with active HOAs require architectural review before exterior alterations; we provide product data sheets, color samples, and Miami-Dade NOA documentation for your association’s approval process, and we do not pull permits until written approval is received.
All of Sunrise falls within Broward County’s HVHZ, which means every window and door replacement must use Miami-Dade NOA or Florida Product Approved impact-rated units; we verify the product approval number on every specification and document it in your permit file.
We provide the documentation most Sunrise carriers now require: product approval numbers, permit records, inspection reports, and photo evidence of installation; bring us your carrier’s checklist and we’ll verify compliance during the measured survey at no charge.
Call (754) 714-7309 to schedule your free estimate. Every engagement begins with a measured survey you keep, and the written quote is the same document our crew works from. That’s Haven Clause 1, and it’s how we’ve handled every one of our 18,000+ installations since 2012.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.